Products & Services About Lilja What's New Winners & World Records Articles Support

Factory Contours

The following is a listing of factory barrel contours that we have CNC lathe programs for. This is for centerfire rifles only. Rimfire factory contours can be found on this page. The list below does not include AR profiles. AR's can be found on this page.

We have CAD drawing files for most of the contours listed below available as a .pdf file. To see these files click on the blue designation in the left column.

12AUG14 Lilja factory barrel contour listing
last update  
blank
weight
blank
DESIG. DESCRIPTION
length
pounds
dia.
 
       
Accuracy International
AI300 copy of Accuracy International 300 Win Mag st. taper fluted barrel
28
 
1.25
1.180" dia. For 2.5" then st. taper to .905" at 24.625" then .830" dia. straight
 
 
       
Adams & Bennett
 
abf44 Copy of F44 contour; .725" dia. Muzzle at 28", .974" at radius tangent
28
 
1.25
 
       
Beretta
 
mato copy of Beretta Mato 7mm Rem Mag 1.190" dia. Shank, .820" at radius tangent
28
 
1.25
to .625" at 24" (.591" at 28")
 
 
       
Browning
 
brownvmt Browning Varmint taper, 1.175" dia. shank 2.5" long st. taper to .702" at 28"
28
4.31
1.25
brown2st Browning/Belgium two step contour,1.175" for 2.75" then 5" radius down to 1.000"
28
3.74
1.25
for 3" them 5" radius down to .870" st. taper to .643" at 28" (original  muzzle .680" at OAL of 24")
 
brwn2st2 same as brown2st on line above except that .870" dia. is .800 and original muzzle
28
3.21
1.25
dia. was .590" at 22" original was 30-06
 
bar Browning BAR contour,1.21" for 2.5". st. taper to .825" over 3.9" length, st.
28
3.31
1.25
taper to .537" at 28" (.013" per inch taper)
 
abolt Browning A-Bolt;1.180" for 2.75", 30" R down to .805" then st. taper to .600" at 26" (.578" at 28")
28
3.17
1.25
abolthor Browning A-Bolt 22 Hornet; 1.180" dia for 2.5" then taper to .740" over 4.5" then st. taper to .515" at 28" (original was .560" at a finish length of 22")
28
2.91
1.25
aboltvrm

browning A-Bolt varmint contour: 1.175" for 2.5" then contour down to .900 over 1.5" to .900" radius tangent dia. then st. taper to .720" at 28" (.750" at 24")

28
3.94
1.25
b78 Browning M. 78 1.175" for 2.5", radius over 1.5" to 1.000" at tangent then st.
28
4.40
1.25
taper to .713" at 28" (original was .725" at 26")
 
see 'special rimfire contours' for listing of Browning factory rimfire contours
 
 
       
Champlin
 
champlin copy of Champlin 25-06 contour: 1.150" for 2" then 11" R over 2" to .800" dia.
29
3.05
1.25
to .545" over 22", original 26" finish length, our 29" blank is 3.5" of shank
 
 
       
Colt
 
colt copy of Colt bolt action .300 Wby Mag: 1.140" for 3" then taper to .800" over 3.4"
28
3.57
1.25
then taper to .620" at 24" (.578" at 28")
 
 
       
Cooper Arms
 
ca130 Cooper Arms CA 130 contour 1.00" for 4" then st. taper to .640" at 28" (.700" at 24")
28
3.85
1
ca150 Cooper Arms CA 150 barrel contour .940" for 2.5" then st. taper to .510" at 28"
28
3.47
1
ca160 Cooper Arms CA 160 barrel contour .940" for 2.5" then st. taper to .565" at 24"
24
3.10
1
ca170 Cooper Arms CA 170, 1.150" shank, radius down to .865 then .630 at 27"
28
3.44
1.25
ca180 Cooper Arms CA 180, 1.100" shank, radius down to .730" then .567 at 28"
28
2.65
1.25
ca190 Cooper Arms CA 190, 1.180" shank, taper down to .880" then .652" at 28"
28
3.72
1.25
rf 24 Cooper Varmint taper (CA220) .990" for 3" then  st. taper to .750" at 27"
28
4.42
1
taper 91 Cooper M. 22 Varmint 1.125" for 4" then st. taper to .750" at 26" (.716" at 28")
28
5.00
1.25
     
 
CZ
 
cz527 copy of 7.62x59 CZ barrel (shop note: in rimfire file, same as rimfire contour)
24
2.23
1.25
.980" dia. Shank, .780" dia. at radius tangent to .570" at muzzle (original 22" fin)
 
 
       
Dakota
 
dakota1 standard Dakota #1 contour with .532" muzzle at 25.5"
28
2.57
1.25
dakota2 standard Dakota #2 contour with .557" muzzle at 25.5"
28
2.77
1.25
dakota3 standard Dakota #3 contour with .607" muzzle at 25.5"
28
3.14
1.25
dakota4 standard Dakota #4 contour with .632" muzzle at 25.5"
28
3.32
1.25
dakota5 standard Dakota #5 contour with .682" muzzle at 25.5"
28
3.70
1.25
dakota6 standard Dakota #6 contour with .732" muzzle at 25.5"
28
4.14
1.25
all of the above Dakota contours have a 1.200" dia shank
 
hatchet Dakota Predator taper 1.150" for 3" then st. taper to .614" at 28" (.0214"/inch)
28
4.63
1.25
lilja4 Dakota Light Predator; our standard #4 contour with 2.9" of 1.150" dia. Shank
28
 
1.25
 
       
Harrington & Richardson
 
hr17 copy of H&R 17/223 contour, original shank dia. of 1.055" for 2", .665" at radius 
28
2.32
1.25
tangent and muzzle dia. of .500" at 20". (our blank is .510" at 28" and 4" shank)
 
hr222 same as above but for 24" blank
24
 
1.25
 
       
Howa
 
howav copy of Howa varmint taper: 1.175" for 2.5" then radius over 3.1" down to .970"
28

4.95

1.25
then st. taper to .875" at 24" (.858" at 28")
 
     
 
Husqvarna
 
husky Husqvarna contour from a 22" long 270 Win.: 1.090" for 2.5" (chuck grip) then st.
28
3.22
1.25
taper to 1.050" over 2.2" then st. taper to .950" over 2.375" then st. taper to .745"
 
over 2.750" then st. taper to .548" at 28" (original was .590" at 22" finish length)
 
(also same as FFV Sports 22-250)
 
husky2 Husqvarna contour from a 20.7" long 243 Winch.: 1.100" for 3.5" (chuck grip) then
28
2.90
1.25
st. taper to .950" over 1" then st. taper to .780" over 3" then st. taper to .710" over
 
2" then st. taper to .552" at 28" (original was .590" at 20.7" finish length)
 
 
       
Interarms
 
minim copy of Mini Mauser .223 .555" muzzle dia. At 20", 1.025" dia shank, .790" at 
28
2.59
1.25
radius tangent (blank is .510" at 28")
 
 
       
Ithaca
 
ithaca Ithaca/ 'made in Finland' 22-250 original, 1.070" dia. shank with large radius down
28
3.13
1.25
to .685" dia.over a 10.75" length, original muzzle .635" at 22.75" (.610" at 28")
 
 
       
Kimber
 
kimberFN Kimber M. 84 varmint contour, original was a .17/221 with muzzle dia. of
28
2.92
1
  .680" at 22", .950" dia. shank and 13" radius over 1.5" dropping to .810" dia      
kimvrmt Kimber varmint taper: 1.050" for 3.5" st. taper to .685" at 26" (.653" at 28")
28
4.18
1.25
kim84m Kimber M. 84M 1.050" for 2.75" then radius over 2.75" to .710" then st. taper
28
2.34
1.25
.565" at 22" (.512" at 28", .0088"/inch)
 
mod84m modified version of km84m above making the muzzle diameter .617" at 22"
28
2.55
1.25
  other dimensions remain the same (.583" at 28")      
kim84 Kimber .223 varmint taper: .965" for 2.5" then st. taper to .609" at 28"
28
3.69
1
  original was .665" at 24"      
kim84ahl Kimber 8400 with 1.300" dia. shank
28
3.66
1.5
kimclass 1.260" dia. for 2.5" then 1.125" dia. for 1.875" then radius down to .805 then st.
28
2.55
1.25
taper down to .530" at 28" (muzzle dia. of .560" at 24" from Classic model 30-06)
 
kim8400 1.260" dia. For 2.5" then 1.125" dia. for 1.125" then radius down to .805 then st.
28
2.41
1.25
taper down to .530" at 28" (muzzle dia. of .560" at 24")
 
Copy of Kimber Model 8400 Montana 300 WSM
 
khornet copy of Kimber of Oregon 22 Hornet .970" at shank, .760" at tangent
28
3.10
1
kimfwt copy of Kimber of Oregon featherweight type contour, original is 30-06 w/ .550"
28
3.35
1.25
muzzle at 22"
 
kim338 copy of Kimber of Oregon .338 Win Mag 1.225" for 2.5" then radius over 3.5" to
28
3.08
1.25
.760" then st. taper to .575" at 28" (original .575" at 24")
 
taper 127 1.140" for 4" then st. taper to .593" at 28" (copy of Kimber 204 taper
28
4.59
1.25
original is .685" at 22.5")
 
provarm 1.045" for 3" then radius down to .850" over 1" then .850" dia. To muzzle
28
4.08
1.25
kim84L Kimber M. 84 L contour: 1.050" for 3.5" then radius over 2.75" to .700"
28
2.48
1.25
dia. then st. taper to .560" at 24" (.532" at 28")
 
       
Mannlicher-Schoenauer
 
mscarbin Copy of carbine contour; 1.140" dia. Shank, 1" radius down to .925" tapering to 
28
2.71
1.25
.820" over 1.790" then drop to .755" and then st. taper to .595" at 21" (.527" at 28")
 
 
       
Marlin
 
marlin .935" for 4" then st. taper to .700" over 6.5" then st. taper to .650" at 20.5"
28
2.78
1
(.620" at 28") original off Marlin lever rifle
 
 
       
Montana Rifle Company
28
3.95
1.25
MRC375 copy of MRC .375 H&H contour: 1.200" for 3" then radius down to .940" over 2.4"
 
then st. taper to .705" at 21" (.609" at 28")
 
 
       
Remington
 
remmag28 Remington mag contour w/2.5" long shank x 1.250" .609" muzzle dia. at 28"
28
3.67
1.25
this contour is the same as the LVSF (light varmint stainless fluted - .657" at 22")
 
original Remington barrel is .640" at 24"
 
same as remmag28 above but with 30" finish length, .589" dia. at 30"
30
3.79
1.25
remsport Remington sporter contour (non-mag) with 2.5" long shank x 1.200", .630" muzzle
28
3.31
1.25
original Remington barrel is .645" at 22", .630" at 28"
 
remsp30 Remington sporter contour above but 30" blank length, .620" dia. at 30"
30
3.49
1.25
rem06 Remington sporter contour same as 22" long 30-06; .590" at 22", .760" at 
28
3.14
1.25
tangent, 1.200" shank, blank muzzle dia. = .543" (this is the original Rem contour not the rem06r shown below)
 
rem06r same as rem06 above but with 100" radius between .760" dia. and 1.200" dia.
28
3.06
1.25
rem06 above is a straight line between these two points not a radius
 
sendaro Remington Sendaro / Varmint contour with .820" muzzle dia. At 28"
28
5.15
1.25
send050 same as Sendaro but -.050" in diameter except shank stays 1.250"
28
 
1.25
sendar30 Remington Sendaro / Varmint contour to .810" at 30"
30
5.05
1.25
sendar32 Remington Sendaro / Varmint contour to .800" at 32"
32
 
1.25
sendar34 Remington Sendaro / varmint contour to .798" at 34"
34
 
1.25
romsen32 same as sendar32 but with .825" muzzle at 32" finish
32
 
1.25
rem721 copy of Remington 721 contour with hump (.605" at 22.75") .566" at 28" blank
28
3.32
1.25
remmtn copy of Remington Mountain Rifle contour
28
3.50
1.25
remmtn24 same as remmtn above but will finish to 24" with a muzzle dia. of .550"
28
3.19
1.25
shank length is 4" of 1.200" dia.
 
rem600 Rem 600 contour, original was 18.5" long with .610" muzzle and .850" at radius
28
4.26
1.25
tangent, our blank has 5.75" of 1.250" dia. shank and muzzle dia. Of .510"
 
rem788 Remington 788, original was a .223 24" long with a muzzle dia. Of .575"
28
3.01
1.25
and 1.125" dia. Shank with .745" at radius tangent
 
rem750 copy of Remington 750 (semi-auto) .270: 1.170" dia. Shank. .830" at radius
28
3.31
1.25
tangent, .650" at original length of 22"
 
see 'special rimfire contours' for listing of Remington factory rimfire contours
 
 
       
Ruger
 
1rug560m Ruger #1 contour with 1.160" dia. Shank,turn to .509 muzzle at 28", .582" at 20", .560" at 22", .750" at tangent point, similar to 77int shown below but radius section is 1" longer on this profile
28
2.80
1.25
rugerspt Ruger 77 sporter contour,1.150" for 4" then radius over 3.5" down to .750"
28
3.01
1.25
then st. taper to .520" at 28" (.542" at 26", .564" at 24", .586" at 22")
 
(also used on Hawkeye in smaller cartridges)
 
rugerp Ruger sporter contour w/ 3.5" of 1.170" dia. .770" at radius tangent, .515" at 28"
28
2.95
1.25
used on Ruger #1's chambered for .243 and similar sized cartridges & M.77's
 
.550" at 24" (.012" / inch)
 
rugermag Ruger Magnum contour with .555" muzzle dia., .900" at radius tangent, 1.160" diameter shank
28
3.33
1.25
rugervmt Ruger Varmint/Tactical 1.160" for 3.5" with .755" muzzle at 24" (.720" at 28") .935" at radius tangent
28

4.32

1.25
rgrvmt30 same as rugervmt but with a 30" long finish length (.700" at 30")
30
4.42
1.25
30ruger1 Ruger #1 heavy contour muzzle dia. .600" at 30", .900" at radius tangent
30
3.87
1.25
ruger1 Ruger #1 contour 1.200" for 2.75" with .620" muzzle at 26" (.594" at 28")
28
3.61
1.25
.900" at radius tangent
 
taper 18 Ruger #1: 1.200" for 4" then st. taper to .800" at 26" (.836" at 24", .732 at 28")
28
5.79
1.25
used on Ruger #1's chambered for .416 Rigby, .458 Win & .458 Lott
 
ruger3 1.150" for 2.5" then radius over 4" to .775" at radius tangent then st. taper to .602"
28
3.07
1.25
at 28" (original .650" at 22") used on Ruger #3 22 Hornet
 
hawk338 Copy of Ruger Hawkeye in 338 Mag: 1.160" dia. shank .900" at radius tangent st. taper to .625" dia. muzzle at 24" (.573" at 28")
28
3.52
1.25
hawk358 Copy of Ruger Hawkeye 358 Win 1.160" shank, .760 radius tangent to .610" at 28"
28
3.10
1.25
original was .650" at 22"
 
hawk375 Copy of Ruger Hawkeye .375: 1.160" for 3" then radius down to .875" dia. then straight taper to muzzle dia. of .637" at 28" (original was .675" at 24")
28
3.63
1.25
77int copy of Ruger 77 International Mannlicher contour: 1.160" with radius over 2.75"
28
2.61
1.25
.750" at radius tangent then st. taper to .510" at muzzle (original was 18.25" long) see 1rug560m above
 
ruger458 copy of M. 77 .458 Win Mag contour: 1.155" for 4" then st. taper to .975" over 4"
28
4.13
1.25
then st. taper to .810" at 24" (.777" at 29")
 
rugergs copy of Ruger Gunsite Scout Rifle contour
24
3.58
1.25
taper162 copy of straight taper Ruger Varmint taper 32" long
32
5.74
1.25
see 'special rimfire contours' for listing of Ruger factory rimfire contours
 
 
       
Sako
 
sako223 Sako contour 1.035" shank for 2.5" to .565" at 28", .750" at radius tangent
28
2.58
1.25
original .590" at 22.5"
 
sakosptr Sako contour 1.120" shank for 3.5" to .608" at 28",.770" at radius tangent
28
3.16
1.25
original .630" at 22.5", also used on Sako M. 85 .270 WSM fluted
 
sakomag Sako contour 1.160" dia. shank for 2.5" taper over 3.5" to .818" at radius tangent
28
3.32
1.25
.616" at 28"
 
sakovrmt Sako contour 1.120" shank for 2.5" to .853" at 28", .885" at radius tangent
28
4.55
1.25
taper 26 Sako varmint contour for the 17 Remington
28
4.35
1.25
1.050" for 3" then st. taper to .700" at 28" (.756" at 24")
 
sako17 Sako Varmint contour from 17 Rem (different than taper 26 above)
28
4.29
1.25
1.035" for 2.5" then taper to .875" over 3.25" then st. taper to .865" at 23.62 OAL
 
(.862" dia. At 28" blank length)
 
vixen 1.040" for 2.5" then st. taper to .719" at 28" (original 1.040" then st. taper to 
28
4.33
1.25
.750" at 23.6"
 
sakofl Sako fluted barrel; original was 270 Win w/ 21" fin length muzzle dia. .595"
28
3.06
1.25
1.125" for 2.75" then .840" at radius tangent, st. taper to .525" at 28"
 
sako270 1.160" for 2.5" then taper down to .900" over 3" then st. taper to .533" at 28"
28
3.37
1.25
original was 270 Win. W/ 2" of 1.160" shank and muzzle dia. .588" at 24.3"
 
forester 1.085" for 2.5" then st. taper to .755" at tangent then st. taper to .560" at 28"
28
2.71
1.25
original had muzzle dia. of .590" at 23" and was 22-250
 
forestvm 1.085" for 2.5" then st. taper to .750" at 26.5" (.729" at 28") 
28
4.67
1.25
rf 74 1.035" dia. for 3" then st. taper to .860" at 27" (.853" at 28")
28
5.24
1.25
same as Sako 222 Rem varmint w/ muzzle dia. of .860" at 23.6"
 
sako220 copy of Sako 220 Swift contour; 1.110" for 2.5" then taper over 2.1" to .820" then
28
3.09
1.25
taper over 19.5" to .635" (original .635" at 23") .598" at 28"
 
trg TRG contour; 1.155" dia. shank tapering down to .873" over 6" then st. taper to .863" at 28" (original was .865" at 24")
28
4.68
1.25
see 'special rimfire contours' for listing of Sako factory rimfire contours
 
 
       
Savage
 
savvrmt Savage Varmint taper 1.065" dia. shank for 2.5" st. taper to .790" at 28"(very similar to taper 20 shown at the end of this Savage listing
28
4.83
1.25
sav116 Savage M. 116 -1.060" for 2.5" then st. taper to .845" dia. at 12.5" then st. taper to .810" dia. at 24" (.798" dia. at 28" blank length)
28
4.28
1.25
sav340 copy of Savage model 340 barrel; .875" for 3" then st. taper to .600" at 24" 
28
2.72
1
.550" at 28" blank length
 
xp 10 copy of Savage model 516 contour except shank dia. is 1.065" for 2.5" and
15
2.08
1.25
OAL is 15", muzzle dia. is .725" (original Savage was 12.3" OAL)
 
sav250 1.020" for 3" then radius to .735" at radius tangent then st. taper to .605 at 22" .557" at 28" (copy of Savage 99)
28
2.55
1.25
sav111 Savage model 111 original was .243 Win 1.050" for 2.5" then taper to .790" over
28
2.79
1.25
5" then taper to .750" over 1.5" then taper to .555" at original length of 22"
 
muzzle dia. On 28" blank is .510"
 
sav111g same as sav111 above but muzzle dia. changed to .650" at 22" (28" blank is .625"
28
3.09
1.25
taper 82 Savage M. 12     1.200" for 3" then st. taper to 1.008" at 26" (.992" at 28")
28
6.89
1.25
sav16 Savage M. 16   1.115" for 2.5" then 45º drop down to 1.035" then st. taper to .755" then st. taper to .596" at 28" (original was .620" at 24" & chambered .300 WSM)
28
3.09
1.25
sav99f Copy of Savage model 99F with rear site hump; 1.020" dia. Shank, drop down
28
2.54
1.25
to .750" dia over 3" then .855" dia. Hump that is .700" long, down to .700" then st.
 
taper to .570" dia. at original length of 22" (.542" at 28")
 
taper 151 copy of Savage M. 12 F/TR 1.125" for 2.5" then st. taper to .985" at 30"
30
6.71
1.25
savm14 copy of Savage Model 14: 1.125" for 2.5" then 45º chamfer to 1.035" then
28
3.44
1.25
st. taper to .760" then st. taper to .710" at 26"
Some of our straight taper profiles will also work on the Savage actions using a
1.050" - 1.062" and 1.125" dia. shanks with the Savage barrel nut. These would include:
Taper 20, 26, 79, 107, 124, 151, 153
       
Stevens      
110esk copy of Stevens model 110E series K, original was 30-06
28
2.73
1.25
 
Tikka
tikka595 Tikka M. 595 contour 1.085" for 3" then down to .563" at 28", .820" at radius
28
3.30
1.25
tangent, original .630" at 22.5"
tikkaT3 copy of Tikka T3; 1.130" dia. Shank, taper over 3.5" down to .760" then st.
28
3.03
1.25
taper to .604" at 28" (original was .625" at 24")
595cont Tikka model 595 Continental varmint profile; 1.120" dia. shank for 2.5" the taper
28
4.07
1.25
over 7" to .810" then taper to .785" at muzzle
     
Thompson/Center      
venture T/C Venture model barrel original was .650" at 24"
28
3.06
1.25
 
Weatherby
wby1 Weatherby #1 contour 1.150" for 2.5" down to .730"
28
2.59
1.25
then .009" per inch taper to .520" at 28" (original .550" at 24")
used on various models including Alaskan
wby2 Weatherby #2 contour with .600 muzzle dia. , 1.200" dia. Shank for 3"
28
3.32
1.25
.790" at tangent (original .600" at 26")
wby3 Weatherby #3 contour, 1.200" dia. for 2.5", .830" at tangent, .626" at 28"
28
3.54
1.25
(original .640" at 26")
wby4 Weatherby #4 contour, 1.225" dia. for 3", 1.045" at tangent, .816" at 28"
28

5.30

1.25
(original .816" at 26")
wby2x30 Weatherby #2 contour with .575" muzzle at 30", 1.200" dia. shank
30
3.36
1.25
wby378 Weatherby contour used on fluted 30/378 and 338/378 rifles by Weatherby
28
4.10
1.25
1.250" dia for 3" then taper to .900" over 2" then taper to .700" at 26" (.687@28) similar to our #5 contour
378W30 same as wby378 contour above but for a 30" finish length, muzzle .670" at 30"
30
4.29
1.25
wvang Copy of Weatherby Vanguard contour 1.200" dia. taper to .785" dia. over 3.3"
28
3.18
1.25
then st. taper to .582" at 28" (original .620" at 24")
mkvul Mk V ultra light contour, 1.090" dia. Shank taper to .750" over 2.5" then st taper to
28
2.56
1.25
.550" at 26" (.520" at 28")
 
Whitworth
whitwort Copy of Whitworth .458 barrel 1.220" at chamber then st. taper over 5" to .880"
28
1.25
then st. taper to .670" at 23.5" (.630" at 28")
 
Winchester
win70mag Win. M. 70 mag contour w/1.200" shank to .565" muzzle, .800" at radius tangent
28
3.32
1.25
(original .580" at 26") also same as new style M. 70 30-06 except that shank
is 1.150"
70mag30 similar to win70mag above except 30" blank length with muzzle dia. of .545" at 30"
30
3.37
1.25
70sa308 Win M. 70 SA (original in 308 Win) also same as M. 70 XTR Sporter & M. 70 7mm WSM 1.135" for 2.5" then st. taper to .800" over 4", st. taper to .585" at 24"(.543" at 28")
28
3.07
1.25
winfwt26 Winchester Featherweight contour to .531" at 26" and 2.5" long 1.200" shank
26
2.84
1.25
(.30 caliber maximum in this contour)
winfwt05 same as winfwt26 above except that muzzle dia. is .550" at 20"
26
2.78
1.25
(winfwt26 is .595" at 20")
winm94 Winchester M. 94 contour with .940" dia. shank to .587" muzzle dia.
26
2.08
1.25
win375 Win M. 70 375 H&H factory contour + .020", 3" of 1.150" to .672" at 28"
28
1.25
(.720" at 24") .950" at radius tangent, .012" taper per inch
win375b Win M. 70 375 H&H factory post '64 contour, 1.220" for 2.5" tapering to .950" over 1.62" then st. taper to muzzle of .670" at 28" (original was .720" at 24")
28
4.08
1.25
375win64 Win M. 70 pre '64 375 H&H Mag;1.250" for 2.75" radius down to .950" at tangent
28
4.19
1.25
then st. taper to .653" at 28" (original was .685" at 25")
pre6470 Win M. 70 copy of pre-64 contour with rear site hump, .600" at 24" (.557" at 28")
28
3.09
1.25
1.150" dia. Shank
laredo Win Laredo contour 1.135" for 3", .945" at radius tangent then st. taper to .785"
28
4.46
1.25
at 28", original was .800" at 26"
laredo_b same as Laredo but muzzle dia. is .825" at 26"
28
4.58
1.25
laredo30 same as Laredo but for a 30" finish length (.770" at 30")
30
4.67
1.25
wssm Win 243 WSSM contour 1.150" dia. shank, .755 at radius tangent, .540" muzzle
28
2.88
1.25
dia. at 22" on original
223wssm Win 223 WSSM varmint contour; 1.155" for 2.5", .875" at radius tangent, 
28
3.85
1.25
.740" at 24" (.720" at 28" blank length)
win225 Win varmint 225 contour 1.125" for 2.5" then taper over 4" to 1.010" then straight taper to .740" at 28" (original was .785" at 24") This contour also used on pre-64 30-06 target barrels
28
4.70
1.25
taper 15 copy of Winchester Highwall 1.200" for 2.5" then st. taper to .900" at 30"
30
6.78
1.25
taper 79 copy of Winchester Highwall 1.050" for 2.5" then st. taper to .900" at 30"
30
5.66
1.25
taper 107 Copy of Win. Low wall 1.050" for 3" then st. taper to .600" at 24" (.515" at 28")
28
3.59
1.25
steal2 copy of Stealth II contour: 1.150" for 3" then taper to 1.000" over 2.5" then 
28
5.16
1.25
st. taper to .875" at 26" (.860" at 28")
steal30 same as stealth2 above but for 30" long blank (.845" dia. at 30")
30
5.43
1.25
win1885 copy of Winchester 1885 barrel profile; 1.175" shank to .843" at muzzle
30
5.41
1.25
m70sg copy of Win. M. 70 Super Grade in .270; 1.150" for 2.5" then taper to .815"
28
3.19
1.25
over 3.6" then taper to .566" at 28" (original was.595" at 24")      
 
To place an order for one of these contours please use the designation
in the left hand column.
 
 
For a list of those contours see the 'rimfire special contours' .pdf page.
We can duplicate almost any contour not listed here for a one-time $40 programming charge.
 

 

Enter360 Media Group Inc.